Product name: | DTX2 series cap torque tester |
Category: | ATTONIC |
Product model: | DTX2系列 |
application:
Torque measurement of caps for cosmetics, beverages, and food.
Features:
1. Reduce the trembling of the meter.
2. The weight of the meter and the vertical force are maintained by 2 ball bearings.
3. It is easy to clamp the sample through 4 clamping ports.
4. The digital display shows clockwise/counterclockwise torque and peak torque.
5. The comparison function can determine the setting value of the upper and lower limits.
6, the memory can store up to 1000 measured values.
7, a variety of output such as RS-232C, simulation and Sanfeng digital display connected to personal computer.
8. Three units are available (N.cm/Kg.m/lb.in or N.cm/Kgf.cm/lb.in).
9. Two types are available (with battery or AC adapter).
model:
Each series offers the following six ranges
型號 | 量程 | 顯示 | 精度 | |
DTX2-2N-A | DTX2-2N-B | 2N.m | 2.000N.m | 0.001N.m |
DTX2-5N-A | DTX2-5N-B | 5N.m | 5.000N.m | 0.001N.m |
DTX2-10N-A | DTX2-10N-B | 10N.m | 10.00N.m | 0.01N.m |
DTX2-200Nc-A | DTX2-200Nc-B | 200N.cm | 200.0N.cm | 0.1N.cm |
DTX2-500Nc-A | DTX2-500Nc-B | 500N.cm | 500.0N.cm | 0.1N.cm |
DTX2-1000Nc-A | DTX2-1000Nc-B | 1000N.cm | 1000N.cm | 1N.cm |
Difference between "-A" and "-B" models
型號 | 電源 |
DTX2-[范圍]-A | AC電源 100V~240V |
DTX2-[范圍]-B | NiMH充電電池或AC適配器 |
[optional accessories]
仿真連接線 CB-201 使用該線接到到仿真儀器 | 筆錄器SS-100F-MM |
RS232C連接線 CB-204 | 軟件ZLINK2E |
三豐電纜CB- 304 | 三豐微型處理器DP-1VR |
Technical Parameters:
型號 | DTX2-A系列 | DTX2-B 系列 |
測量單位 | N.m/kg.m/lb.in 或N.cm/kg.cm/lb.in | |
顯示 | 4位數LCD單元,模式,過載LED,比較LED | |
采樣率 | 1000次/秒 | |
顯示更新 | 10次/秒 | |
扭矩容量 | 超過150%的額定容量(超過110%的容量LED閃爍,鳴響) | |
樣品直徑 | 20毫米到180毫米 | |
A / D轉換器 | 24位信號 | |
處理器 | 8位數一個微型處理器 | |
精度 | + / - 0.5%的額定容量 | |
電池使用 | ——— | 約8小時,充電10小時 |
使用溫度 | 0 - 40攝氏度 | |
電源 | AC 100V至200V | 鎳氫充電電池 |
尺寸 | 查看下一頁 | |
重量 | 約4開.5kg | |
輸出 | RS232C 三豐數顯仿真電壓 +/- 2V | |
比較信號(+NG, OK,-NG) | ||
過載扭力警告信號(OVL) | ||
輸入 | 近距離接觸 | |
峰值模式 | “和”模式(順時針和逆時針峰值)或“或”模式(順時針或逆時針峰值) | |
比較 | 可設定的帶顏色碼的高低值設定點 | |
內存 | 最多可存儲1000個數據 | |
警報 | 輸出,嗡嗡聲和LED閃爍 | |
比較值+NG時開始鳴響 | ||
其他 | 自動歸零(1.0和25.5之間選擇)阻尼模式(可選7級) | |
自動關機 | 禁用,5,10,30,60分鐘可選 |
Due to the different commercial power supply voltages in different regions, three types of voltage adapters are available (100V, 120V, 230V). When you place an order, determine which commercial power supply voltage is used.
size:
note:
- Please do not use the torque over the range of values, the push-pull force or the effect of the switch that does not consider the power supply.
- Please do not use the instrument in an environment where the temperature is rapidly changing, high temperature, humidity, and close to water and dust.
- All information is subject to change without notice.